Atomic Configuration of Planar Defects in Multiferroic Ca-doped BiFeO3 Films

Extended abstract of a paper presented at Microscopy and Microanalysis 2010 in Portland, Oregon, USA, August 1 - August 5, 201

Domain-wall motion and interfacial Dzyaloshinskii-Moriya interactions in Pt/Co/Ir(tIr)/Ta multilayers

The interfacial Dzyaloshinskii-Moriya interaction (DMI) is important for chiral domain walls (DWs) and for stabilizing magnetic skyrmions. We study the effects of introducing increasing thicknesses of Ir, from zero to 2 nm, into a Pt/Co/Ta multilayer between the Co and Ta layers. There is a marked increase in magnetic moment, due to the suppression of the dead layer at the interface with Ta, but the perpendicular anisotropy is hardly affected. All samples show a universal scaling of the field-driven DW velocity across the creep and depinning regimes. Asymmetric bubble expansion shows that DWs in all of the samples have the left-handed Néel form. The value of in-plane magnetic field at which the creep velocity shows a minimum drops markedly on the introduction of Ir, as does the frequency shift of the Stokes and anti-Stokes peaks in Brillouin light scattering (BLS) measurements. Despite this qualitative similarity, there are quantitative differences in the DMI strength given by the two measurements, with BLS often returning higher values. Many features in bubble expansion velocity curves do not fit simple models commonly used, namely a lack of symmetry about the velocity minimum and no difference in velocities at high in-plane fields. These features are explained by the use of a new model in which the depinning field is allowed to vary with in-plane field in a way determined from micromagnetic simulations. This theory shows that the velocity minimum underestimates the DMI field, consistent with BLS giving higher values. Our results suggest that the DMI at an Ir/Co interface has the same sign as the DMI at a Pt/Co interface

Characterization of High-Value Bioactives in Some Selected Varieties of Pakistani Rice (Oryza sativa L.)

The present study reports the composition and variation of fatty acids, sterols, tocopherols and γ-oryzanol among selected varieties namely Basmati Super, Basmati 515, Basmati 198, Basmati 385, Basmati 2000, Basmati 370, Basmati Pak, KSK-139, KS-282 and Irri-6 of Pakistani rice (Oryza sativa L). Oil content extracted with n-hexane from different varieties of brown rice seed (unpolished rice) ranged from 1.92% to 2.72%. Total fatty acid contents among rice varieties tested varied between 18240 and 25840 mg/kg brown rice seed. The rice tested mainly contained oleic (6841–10952 mg/kg) linoleic (5453–7874 mg/kg) and palmitic acid (3613–5489 mg/kg). The amounts of total phytosterols (GC and GC-MS analysis), with main contribution from β-sitosterol (445–656 mg/kg), campesterol (116–242 mg/kg), Δ5-avenasterol (89–178 mg/kg) and stigmasterol (75–180 mg/kg) were established to be 739.4 to 1330.4 mg/kg rice seed. The content of α-, γ- and δ-tocopherols as analyzed by HPLC varied from 39.0–76.1, 21.6–28.1 and 6.5–16.5 mg/kg rice seed, respectively. The amounts of different γ-oryzanol components (HPLC data), identified as cycloartenyl ferulate, 24-methylene cycloartanyl ferulate, campesteryl ferulate and β-sitosteryl ferulate, were in the range of 65.5–103.6, 140.2–183.1, 29.8–45.5 and 8.6–10.4 mg/kg rice seed, respectively. Overall, the concentration of these bioactives was higher in the Basmati rice cultivars showing their functional food superiority. In conclusion, the tested varieties of Pakistani rice, especially the Basmati cultivars, can provide best ingredients for functional foods

Differential scanning calorimetric analysis of edible oils: comparison of thermal properties and chemical composition

The thermal profiles of 17 edible oil samples from different plant origins were examined by differential scanning calorimetry (DSC). Two other confirmatory analytical techniques, namely gas-liquid chromatography (GLC) and high-performance liquid chromatography (HPLC), were used to determine fatty acid (FA) and triacylglycerol (TAG) compositions. The FA and TAG compositions were used to complement the DSC data. Iodine value (IV) analysis was carried out to measure the degree of unsaturation in these oil samples. The DSC melting and crystallization curves of the oil samples are reported. The contrasting DSC thermal curves provide a way of distinguishing among these oil samples. Generally, the oil samples with a high degree of saturation (IV65). Each thermal curve was used to determine three DSC parameters, namely, onset temperature (T o ), offset temperature (T f ) and temperature range (difference between T o and T f ). Reproducibility of DSC curves was evaluated based on these parameters. Satisfactory reproducibility was achieved for quantitation of these DSC parameters. The results show that T o of the crystallization curve and T f of the melting curve differed significantly (P<0.01) in all oil samples. Our observations strengthen the premise that DSC is an efficient and accurate method for characterizing edible oils

Dissociation between the Activity of the Right Middle Frontal Gyrus and the Middle Temporal Gyrus in Processing Semantic Priming

The aim of this event-related functional magnetic resonance imaging (fMRI) study was to test whether the right middle frontal gyrus (MFG) and middle temporal gyrus (MTG) would show differential sensitivity to the effect of prime-target association strength on repetition priming. In the experimental condition (RP), the target occurred after repetitive presentation of the prime within an oddball design. In the control condition (CTR), the target followed a single presentation of the prime with equal probability of the target as in RP. To manipulate semantic overlap between the prime and the target both conditions (RP and CTR) employed either the onomatopoeia “oink” as the prime and the referent “pig” as the target (OP) or vice-versa (PO) since semantic overlap was previously shown to be greater in OP. The results showed that the left MTG was sensitive to release of adaptation while both the right MTG and MFG were sensitive to sequence regularity extraction and its verification. However, dissociated activity between OP and PO was revealed in RP only in the right MFG. Specifically, target “pig” (OP) and the physically equivalent target in CTR elicited comparable deactivations whereas target “oink” (PO) elicited less inhibited response in RP than in CTR. This interaction in the right MFG was explained by integrating these effects into a competition model between perceptual and conceptual effects in priming processing

Mixed Dentition Period Follow-up of Primary Unilateral Cleft Nose Deformity Repair

Background:. Recently, there has been an increased acceptance of the primary cleft rhinoplasty providing acceptable outcomes. Nose reconstruction, and specifically cleft nose deformity, should be addressed based on this philosophy. The purpose of this study was to evaluate surgical outcomes during the mixed dentition period after primary surgery to address unilateral cleft lip nose deformity based on the proposed technique. Methods:. This is a retrospective cohort study. Thirty-two primary complete unilateral cleft lip patients were operated on by a single surgeon using the V-Y-Z cleft rhinoplasty. This method combines a composite V-Y advancement flap with lateral Z-plasty. Data collection was accomplished by evaluation of nasal symmetry through anthropometric measurements performed under general anesthesia during primary cleft palatoplasty and alveolar bone graft. The outcomes were evaluated through anthropometric measurements of the repaired nose during the mixed dentition period of follow-up, and no type of presurgical management was performed for any of the patients. Results:. Total nasal symmetry has been observed in 34.37% of patients at 7 years or more and 40.62% at 1-year follow-up. Nonstatistically significant differences were observed during follow-up, and major revision requirement (>3 mm of asymmetry in any of the nose measurements) was observed in 9.37% of patients. Conclusions:. The proposed primary cleft rhinoplasty is a good approach to improve nasal appearance in patients with complete unilateral cleft lip and palate

Atomic Configuration of Planar Defects in Multiferroic Ca-doped BiFeO3 Films

ISSN:1431-9276ISSN:1435-811